RX
Shelving
   

   
 

Double Sided Gondolas are configured for a Drug Store with the same components as the single sided wall shelving units.  The only difference is the lower shelving and upper shelves are connected to the uprights on both sides.

A Double Sided Gondola Section includes one Basic Upright with Cap, two Base Shelves, two Kick-plates, two Back Panels and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner for two piece backs.
   




What is a Gondola Section and a Gondola End?

If you will notice via the illustrations below the Gondola Section includes everything except the second Gondola End as only one Gondola End is needed per Gondola Section when creating a multi section Gondola Aisle. To complete the Gondola Aisle a Gondola End is Necessary.

Gondola Section

To create a gondola aisle as pictured in the images on the top of this page you will use the Gondola Section pieces below to configure your aisle length as the sections are available in either 3 or 4 foot sections and your will need an end to complete your aisle of Gondola.

Gondola Section

A Gondola Section includes 2 lower shelves, 1 upright, 1 upright cover, 2 base shoes, 2 hardboard backs, 2 kick-plates, 2 base shoe cover, 1 upper spanner, 1 center spanner, and 1 lower spanner.

Gondola End

A Gondola End is used to complete a Gondola Aisle. For example a 16' Gondola Aisle will consist of 4 Gondola Sections and 1 Gondola End to complete the Aisle.

Gondola End

A Gondola End includes 1 upright, 2 base shoes, 2 base shoe covers, and 1 upright cover.


eXTReMe Tracker

Double Sided Gondolas